Raw material and waste balance in the production of an antistatic combined yarn: mass and value analysis and substantiation of machine requirements
Keywords:
combined yarn, waste balance, draft-in coefficient, material utilisation, value-weighted wasteAbstract
In antistatic combined yarns, only the cotton component passes through all preparatory stages of a spinning mill, whereas the far more expensive conductive multifilament is introduced at the ring frame. Mass-based waste balances must therefore be built for the cotton fraction and miss the economic weight of the waste. This study develops a raw material and waste balance, in mass and value terms, for a 24 tex combined yarn of cotton (77 %) and the conductive multifilament Nega-Stat® P210 (23 %) produced on a carded ring-spinning line. Allocating the waste norms to the processing stages gives total returns and waste of 11.11 % and a yarn yield of 88.89 % for the cotton component, and 2.53 % waste for the multifilament. A balance equation that accounts for in-house recycling of sliver and roving returns raises the yarn yield on fresh cotton to 90.02 %. Draft-in coefficients (77.0–82.8), stage outputs for 120 kg/h of yarn and the machine set are substantiated. Producing 100 kg of yarn consumes 86.6 kg of cotton mix (85.5 kg of fresh cotton when returns are recycled) and 23.6 kg of multifilament, i.e. a material utilisation of 90.7 % (91.7 % on fresh raw material). Multifilament waste is 16 times smaller than cotton waste by mass but 3.1 times larger by value; reducing it by 1 percentage point saves about 0.45 million BYN per year, 12.4 times more than the same reduction for cotton. Separate collection and hydrometallurgical silver recovery are proposed for future silver-coated components.
References
1. Ol’shanskii AI, Ol’shanskii VI, Belyakov NV. Osnovy energosberezheniya [Fundamentals of energy saving]: lecture course. Vitebsk: Vitebsk State Technological University; 2007. 223 p. (in Russian)
2. Pererabotka otkhodov tekstil’noi i legkoi promyshlennosti: teoriya i praktika [Processing of textile and light industry waste: theory and practice]: proceedings of the international conference; 2016 Nov 30; Vitebsk. Vitebsk: Vitebsk State Technological University; 2016. 128 p. (in Russian)
3. Gritsenya AS, Solodovnikov SYu. Legkaya promyshlennost’ Respubliki Belarus’ i napravleniya ee razvitiya [Light industry of the Republic of Belarus and directions of its development]. Minsk: Belarusian National Technical University; 2016. p. 332–333. (in Russian)
4. Programma razvitiya legkoi promyshlennosti v 2016–2020 gg. [Programme for the development of light industry in 2016–2020]. Minsk: Bellegprom Concern; 2016. 38 p. (in Russian)
5. Lawrence CA. Fundamentals of spun yarn technology. Boca Raton: CRC Press; 2003.
6. Morton WE, Hearle JWS. Physical properties of textile fibres. 4th ed. Cambridge: Woodhead Publishing; 2008.
7. Lüttgens G, Wilson N. Electrostatic hazards. Oxford: Butterworth-Heinemann; 1997.
8. EN 1149-5:2018. Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements. Brussels: CEN; 2018.
9. Tseghai GB, Malengier B, Fante KA, Nigusse AB, Van Langenhove L. Integration of conductive materials with textile structures, an overview. Sensors. 2020;20(23):6910. doi:10.3390/s20236910
10. Zamostotsky EG, Kogan AG. Kombinirovannye elektroprovodyashchie niti [Combined electrically conductive yarns]. Vitebsk: Vitebsk State Technological University; 2012. 169 p. (in Russian)
11. Kogan AG. Proizvodstvo kombinirovannoi pryazhi i niti [Production of combined yarns and threads]. Moscow: Legkaya i pishchevaya promyshlennost’; 1981. 143 p. (in Russian)
12. Sawhney APS, Ruppenicker GF, Kimmel LB, Robert KQ. Comparison of filament-core spun yarns produced by new and conventional methods. Text Res J. 1992;62(2):67–73. doi:10.1177/004051759206200202
13. Bedeloglu A, Sunter N, Yildirim B, Bozkurt Y. Bending and tensile properties of cotton/metal wire complex yarns produced for electromagnetic shielding and conductivity applications. J Text Inst. 2012;103(12):1304–1311. doi:10.1080/00405000.2012.677568
14. Horngren CT, Datar SM, Rajan MV. Cost accounting: a managerial emphasis. 15th ed. Boston: Pearson; 2015.
15. Shieldex® filament yarn [Internet]. Swicofil AG. [cited 2026 Oct 12]. Available from: https://www.swicofil.com/commerce/products/shieldex/482/shieldexfilament
16. NEGA-STAT® – a new standard in static dissipative yarns [Internet]. [cited 2020 Dec 29]. Available from: https://nega-stat.com
17. Kostin PA, Zamostotsky EG. Tekhnologiya polucheniya kombinirovannykh elektroprovodyashchikh nitei na mashine PK-100M3 [Technology for producing combined conductive yarns on the PK-100M3 machine]. In: Materialy, oborudovanie i resursosberegayushchie tekhnologii: abstracts of the international conference; 2008 Apr 17–18; Mogilev. Mogilev: Belarusian-Russian University; 2008. p. 4–5. (in Russian)
18. The Rieter manual of spinning [Internet]. Winterthur: Rieter. [cited 2026 Oct 12]. Available from: https://rieter.com/services/expertise/the-rieter-manual-of-spinning
19. Greenwood NN, Earnshaw A. Chemistry of the elements. 2nd ed. Oxford: Butterworth-Heinemann; 1997.